Driveways in Stamford
Resin, block paving, tarmac and gravel driveways across Stamford and its villages, designed for the ground here and priced in writing.
For a typical Stamford drive of 30–55m², resin bound costs roughly £4,500–£12,000, block paving £3,500–£9,250 and tarmac £2,750–£7,250, all in. In the Stamford conservation area a new front surface needs planning permission under the Article 4 direction. A new or wider entrance needs a dropped kerb from Lincolnshire County Council: £300 if the county council builds it, or £470 if an accredited contractor does, and we can build it for you.
- Council
- Lincolnshire County Council (highways), South Kesteven District Council (planning)
- Dropped kerb
- £300 for the council to build it, or £470 for a contractor
- Ground
- Limestone; usually free-draining
- Conservation
- Article 4 across the conservation area
Our 2026 guide prices, all in. Your fixed price comes in writing after the site visit. Council fees checked October 2026.
Driveway prices in Stamford
Our 2026 guide prices, all in: digging out, sub-base, edging, surface and clearing away. Dropped kerb fees are extra and paid to the council.
| Surface | Per m² | Typical 30–55m² drive |
|---|---|---|
| Gravel | £60–£100 | £1,750–£5,500 |
| Tarmac | £90–£130 | £2,750–£7,250 |
| Block paving | £120–£170 | £3,500–£9,250 |
| Resin bound | £150–£220 | £4,500–£12,000 |
Guide prices, not a quote. Your fixed price comes in writing after the site visit.
Driveways for every kind of Stamford house
Stamford is not a town where any driveway will do. Five medieval churches, more than six hundred listed buildings and the country's first designated conservation area mean a new drive has to respect its setting — and the planning rules that protect it. We build resin, block paved, tarmac and gravel driveways across Stamford and its villages, and we know the ground here street by street.
What we see on Stamford driveways
Most of our Stamford work falls into three kinds of property, and each asks for something different.
The stone town centre and St Martin's. Georgian and earlier townhouses around Broad Street, Barn Hill and High Street St Martin's, many listed and all within the conservation area. Frontages are often narrow, access is tight, and finishes need to defer to the stone. Buff and golden resin blends, bound gravel and natural-toned block all work; anything brash does not. Where a property is listed or an Article 4 direction applies, we will tell you before anything is ordered, not after.
Victorian and Edwardian Stamford. The villas along Tinwell Road and the terraces off Empingham Road often have original clay paviour or gravel frontages being converted for parking. Getting a dropped kerb approved through Lincolnshire County Council is frequently part of these jobs, and we manage that process as part of the project.
Modern Stamford. From the 1930s semis along Casterton Road to newer developments on the edges of town, these drives are about space and practicality: widening single drives to doubles, replacing cracked concrete, and adding permeable surfaces that handle two or three cars without drowning the front garden.
Drainage rules matter more here
Paving over five square metres of front garden with an impermeable surface needs planning permission unless run-off is contained on the property. In a conservation town that takes its appearance seriously, we simply build permeable as standard — resin bound on an open-grade base, or permeable block — so the question rarely needs to arise.
Villages we serve around Stamford
We work throughout Stamford and its conservation area, where local limestone and Collyweston slate set the tone. Nearby villages we cover include Ryhall, Great & Little Casterton, Tinwell, Barnack, Collyweston and Easton on the Hill.
Ground, drainage and conservation in Stamford
Stamford sits on Lincolnshire Limestone with well-drained loamy soils, so many sites take a soakaway well. Old cellars, rubble fill and the Welland flood plain change that locally, so we check every site rather than assume.
Stamford was the first conservation area in Britain, designated in 1967, and since December 2018 an Article 4 direction across the whole conservation area removes permitted development for hard surfaces, walls, gates and fences, porches and extensions where they face a road, footpath or open space. In practice, most front driveway and boundary work in the conservation area needs planning permission, and the council's appraisal favours York stone, granite setts and natural materials over concrete paving and tarmac.
The Environment Agency runs a flood warning area for properties near the River Welland in Stamford.
Recent jobs like this
Rated 5.0 from 37 Google reviews
“rutland driveway recently completed our resin driveway in Stamford. The team were great from the start. at first they done an AI mock up for us and we got to change colours etc until we were happy, then the final product looked even better!”
Victor, Stamford · Resin driveway — Google review
“Lewis, Connor and the team at Rutland Driveways laid a new block paved driveway and parking area, and dropped Kerb at our house in Ryhall, from the offset, everything was professional, clearly explained and very detailed , right from Lewis quoting, the quote was very detailed and explained everything that was included, it was …”
Peter, Ryhall · Block paved driveway and dropped kerb — Google review
Driveways in Stamford: questions
Can you work on the narrow frontages in the town centre?
Which driveway surface suits a stone house best?
How much does a new driveway cost in Stamford?
How do I get a dropped kerb in Stamford?
Do I need planning permission for a driveway in Stamford?
Planning a driveway in Stamford?
We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.