Rutland Driveways & Landscaping 07312 132517 Site visit
Automated sliding gate across a sloping drive behind an ironstone wall in Uppingham
Uppingham · LE15

Driveway gates in Uppingham

Uppingham is a hilltop town, and gates on its sloping drives and tight courtyard entrances often work best sliding rather than swinging.

5 yearWritten guarantee
VubaApproved resin installer
NVQQualified
8 yearsTrading in Rutland

A new automated sliding gate in Uppingham typically costs £5,000–£10,000 supplied and fitted, and automated swing gates £4,000–£8,000, plus the power supply. Those are guide prices, firmed up in writing after we see the drive. The key local factor is slope: many drives rise or fall from the road, and swing leaves cannot open into a rising drive, so a sliding gate is often the practical answer here.

Automated sliding gate
£5,000–£10,000
Planning
Not needed up to 2m (1m by a road)
Ground
Northampton Sand ironstone; variable, sloping
Guarantee
5 years, in writing

Our 2026 guide prices. Your fixed price comes in writing after the site visit. Full breakdown: driveway gates cost guide.

Driveway gates in Uppingham

Driveway gates in Uppingham

Uppingham's slopes decide more gate designs than anything else. A drive that climbs away from the road leaves no room for swing gates to open inwards, and the rule that gates must not open outwards over the footway or road rules out the other direction. Sliding gates get round this because they run along the boundary rather than through the drive. On the Victorian and interwar roads leading out of town, and on the later estates to the north and east, we often find exactly this situation.

In the centre, many properties have a rear courtyard or a tight entrance off a lane rather than a front garden. That changes the job again: there may be no straight run of wall for a sliding gate to park against, so a carefully sized pair of swing leaves, opening into the courtyard, can be the better fit. We fit both types in aluminium and composite, automate them with keypads, intercoms or fobs, and force-test every automated gate to the standard.

Uppingham specifically

What makes Uppingham different

Uppingham stands on Northampton Sand ironstone, which generally drains better than the clay around Oakham but varies from one house to the next, so we dig before we design post foundations. Its slopes also push water downhill towards gate openings, and a sliding gate's track or a motor at the low point needs that water given somewhere to go. The historic centre is a conservation area, where road-facing gates can need permission. Several nearby villages, including Lyddington, Seaton, Ayston, Preston, Ridlington and Belton-in-Rutland, have Article 4 directions under which gates can need planning permission.

A typical Uppingham job is an interwar or later house on one of the roads out of town, where the drive rises from the road and the owners want security for cars parked at the top. That usually means a single automated sliding gate running behind an existing wall or fence line, a concrete foundation along its run, a cable from the house, and photocells and safety edges.

Sources: Rutland conservation areas and Article 4 list · Historic England: building stones of Rutland.

Rutland County Council

Permissions in Uppingham

  1. PlanningGates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Listed buildings and the Uppingham conservation area have tighter rules, so we check your address before anything is designed. Planning Portal: fences, gates and walls
  2. TreesTrees in a conservation area need six weeks' notice before work, and protected trees need consent; both are free. Rutland County Council: tree works
  3. Design and priceWe measure up, check the ground and the planning position, and give you one fixed written price.

Rules checked October 2026.

Why us

What you get in Uppingham

  • Sliding gates designed for drives that climb from the road
  • Courtyard entrances measured for inward-opening leaves
  • Article 4 checked in Lyddington, Seaton and nearby villages
  • Sliding and swing gates in aluminium and composite, matched to your fencing
  • Foundations and posts built for the gate's weight and the motor
  • Automation, keypads, intercoms and remote fobs

The specification

  • Survey of the opening, the slope and the power route
  • Foundation beam or post footings in concrete
  • Gate hung or track set, level and true
  • Motor, controls and safety devices fitted
  • Power by a registered electrician, then force-tested
  • Five year workmanship guarantee in writing
Pair of black aluminium slatted electric swing gates between limestone piers at the entrance of a village house, resin drive beyond, discreet motor arms
★★★★★

“Really pleased with my new driveway. Beautifully finished, friendly professional workmen, would definitely recommend and will be using them again for the garden once other renovations complete.”

Driveway — Google review

“Absolutely great guys, job was done in good time and looks brilliant. No complaints, the driveway is immaculate. More work in the near future, thanks again!”

Driveway — Google review
Questions

Driveway gates in Uppingham: questions

What do automated gates cost in Uppingham?
For a sloping Uppingham drive, a new automated sliding gate typically costs £5,000–£10,000 supplied and fitted. Automated swing gates are typically £4,000–£8,000, and putting motors on gates you already own is usually £1,500–£3,000. Power supply is extra, and we write up a fixed price after the site visit.
I live in Lyddington. Do my gates need planning permission?
Possibly. Lyddington, Seaton, Ayston, Preston, Ridlington and Belton-in-Rutland have Article 4 directions under which front walls, gates and parking spaces can need planning permission from Rutland County Council. In Uppingham itself there is no Article 4 direction, but gates facing the road in the conservation area can still need permission.
Can I have swing gates on a drive that slopes up from the road?
Usually not well. A swing leaf opening inwards hits the rising drive, and gates must not open outwards over the footway or road. Sliding gates suit sloping and short drives because they need no swing space, which makes them a natural fit on Uppingham's hillier roads.
We only have a narrow courtyard entrance. What will fit?
It depends on the walls either side. A sliding gate needs a clear run of boundary to park against, which tight centre properties often lack. Where it is missing, a pair of swing leaves sized to the opening and set to open into the courtyard is usually the answer. We measure the swing arc on the visit.

Request a site visit in Uppingham

We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

☎Call 07312 132517 Site visit